液体流量开关；固定设定点，范围：从0.38LPM到5.68LPM；精度：±10%设定点；开关类型：SPDT
产品简介：
P1系列铜流量开关利用一种活塞型设计对流量的过多或不足精确检查。活塞磁性激励一个密封SPDT簧片开关。开关预置动作点从0.38到5.68LPM。P1系列铜流量开关理想用于水力系统流体流量损失保护或保证半导体工艺流程适当的冷却剂流量。
产品规格：
测量介质：兼容液体
接液部件材料 

  开关外壳：黄铜
弹簧：316不锈钢 
活塞：聚砜树脂
"O"形环：Viton?
其它：环氧树脂
工作压力：1000psig(68.9bar) 
工作温度：-29到+107℃
精度：设定点±10% 
封装等级：防爆，Class I，Groups A,B,C,D,Division 2.
开关类型：SPDT簧片开关
电气功率：20VA
电气接线：18AWG，24"(60.96cm)长， 聚合物导线
接口规格：1/4" Female NPT内螺纹
所需过滤：50微米或更好
尺寸：104×44×25 Mm
重量：301克
 

P1-011 Explosion-proof brass flow switch, actuation set point 0.10 GPM (.38 LPM), calibrated for water @ standard conditions.

P1-012 Explosion-proof brass flow switch, actuation set point 0.25 GPM (.95 LPM), calibrated for water @ standard conditions.

P1-013 Explosion-proof brass flow switch, actuation set point 0.50 GPM (1.89 LPM), calibrated for water @ standard conditions.

P1-014 Explosion-proof brass flow switch, actuation set point 0.75 GPM (2.84 LPM), calibrated for water @ standard conditions.

P1-015 Explosion-proof brass flow switch, actuation set point 1.00 GPM (3.79 LPM), calibrated for water @ standard conditions.

P1-016 Explosion-proof brass flow switch, actuation set point 1.50 GPM (5.68 LPM), calibrated for water @ standard conditions.