2600系列温度/过程控制器 具有一个通用的输入热电偶类型J, K, E, T, L, N, B, C, S和R; 高压100ΩPlt。 NIST 100ΩPlt。 DIN 120Ω镍工业1000ΩPlt。 差分输入(-10到+ 10mv直流)和过程输入(0到20ma直流，0到10vdc)。 一个标准的24伏隔离，稳压电源包括操作大多数标准的4-20毫安变送器。
标准功能包括自整定，模糊逻辑，完全可调PID，自动/手动控制与前面板激活键，输出百分比指示，峰谷指示，环路中断保护和指示。对于过程输入，显示是完全可编程从-1999到+9999与可选择的小数点位置。大多数热电偶和RTD输入可以显示整个或十度显示器。该系列2600有单或双设定值输出，可编程开关，PID或热/冷或闭锁报警。所有的输出都与输入隔离。输出包括10安培继电器和0-20毫安直流(可扩展)。
Selectable Inputs:Thermocouple, RTD, DC voltage or DC current.
Input Impedance:Thermocouple: 3 Megohms minimum; Voltage: 5000 ohms; Current: 10 ohms; RTD Current: 200 µA maximum.
Display:Two 4-digit, 7 segment, 0.56" (14.2 mm) high LED.
Accuracy:±0.25% of span, ±1 least significant digit.
Supply Voltage:100 to 240 VAC nominal, +10%-15%, 50 to 400 Hz, single phase; 132 to 240 VDC +10% -20%.
Operating Temperature:14 to 131°F (-10 to 55°C).
Control Output Ratings:Relay: SPDT, 10 A @ 240 VAC resistive, 1/2 hp @ 120 VAC, 1/3 hp @ 240 VAC; Alarm Relay: SPST, 3 A @ 240 VAC resistive; Proportional Current: 0-20 mA DC, scalable into 600 ohms maximum.
Weight:13 oz (369 g).
Front Panel Rating:NEMA 4X (IP66).
| Model |
Description |
| 26130 |
Temperature/process controller, one relay output, with alarm. |
| 26133 |
Temperature/process controller, two relay outputs, with alarm. |
| 26150 |
Temperature/process controller, one current output, with alarm. | |
